Product Description
Compact incremental encoder - Outer diameter :Ø50mm |
|
| Compact incremental encoder - Outer diameter :Ø58mm through hole type |
Compact incremental encoder - Outer diameter :Ø58mm solid shaft |
|
Product parameters
Compact incremental encoder - Outer diameter :Ø50mm
| ||||
Product series | SAH50S | SAH50A | SAH50B | SAH50C |
Size (Shell) | Ø50mm | |||
Spindle size | Shaft type 6 , 8 mm | Through hole ø 6 , 8 , 1 0 mm | Through hole Ø6,8,10,12mm | |
Working principle | Optoelectronics | |||
Power supply voltage | 5±0.25 VDC or 10….30VDC | |||
Output circuit | HTL/ push-pull output, TTL/RS422, voltage output, current output | |||
Output signal | A B , A B Z or A B Z + A / B / Z / | |||
Zero position signal | The width of the Z signal is 1T(0.5T or 0.25T are optional) | |||
Consumed current | 80mA,(HTL/TTL 150mA max.) | |||
Response frequency | 100KHz,125KHz,150KHz,250KHz,300KHz | |||
Connection method | Cable, plug | |||
Qualification method | The axis protrudes backward.，Radial lateral protrusion | |||
Maximum rotational speed | 6000r/min | |||
Main shaft load | Radially 20N, axially 10N | |||
Protection grade | IP65 | |||
Starting torque | 3×10-2 N.m Max | |||
Working temperature | -25..….85℃（Customizable working temperature: -40°... 100 ℃) | |||
Storage temperature | -30C...100℃ | |||
Impact-resistant | 1000m/s²,6ms | |||
Anti-vibration | 100m/s²,10..200Hz | |||
Pulse number | Common pulses:100,120,125,200,250,256,300,360,400,500,512,600,1000,1024,1200,1250, | |||
Compact incremental encoder - Outer diameter :Ø58mm through hole type
| ||||
Product series | SAH58T | SAH58N | SAH58D | SAH58F |
Size (Shell) | Ø 58mm | |||
Spindle size | Through holes: 8,10,12,14,15mm(Hole diameters can be customized as required) | |||
Working principle | Optoelectronics | |||
Power supply voltage | 5±0.25 VDC or 10...30VDC | |||
Output circuit | HTL/ push-pull output, TTL/RS422, voltage output, current output | |||
Output signal | A B , A B Z or A B Z + A / B / Z / | |||
Zero position signal | The width of the Z signal is 1T(0.5T or 0.25T are optional) | |||
Consumed current | 80mA,(HTL/TTL 150mA max.) | |||
Response frequency | 100KHz,125KHz,150KHz,250KHz,300KHz | |||
Connection method | Shielded cable or aviation plug | |||
Qualification method | Radial lateral protrusion | |||
Maximum rotational speed | 6000r/min | |||
Main shaft load | 40N radially, 20N axially | |||
Protection grade | P54,IP65 | IP65,IP66 | IP54,IP65 | |
Starting torque | 3x10-2 N.m Max | |||
Working temperature | -25°.....85℃（Customizable working temperature: -40°... 100 ℃) | |||
Storage temperature | -35...100℃ | |||
Impact-resistant | 1000m/s²,6ms | |||
Anti-vibration | 100m/s²,10...200Hz | |||
Pulse number | Common pulses:100,120,125,200,250,256,300,360,400,500,512,600,1000,1024,1200,1250, | |||
Compact incremental encoder - Outer diameter :Ø58mm solid shaft
| ||||
Product series | SAH58 | SAH58A | SAH58B | SAH58C |
Size (Shell) | Ø58mm | |||
Spindle size | Shaft type 6,8,10mm | |||
Working principle | Optoelectronics | |||
Power supply voltage | 5±0.25 VDC or 10...30VDC | |||
Output circuit | HTL/ push-pull output, TTL/RS422, voltage output, current output | |||
Output signal | A B , A B Z or A B Z + A B / Z / | |||
Zero position signal | The width of the Z signal is 1T(0.5T or 0.25T are optional) | |||
Consumed current | 80mA,(HTL/TTL 150mA max.) | |||
Response frequency | 100KHz,125KHz,150KHz250KHz,300KHz | |||
Connection method | Shielded cable or aviation plug | |||
Qualification method | The axis protrudes backward.，Radial lateral protrusion | |||
Maximum rotational speed | 6000r/min | |||
Main shaft load | 40N radially, 20N axially | |||
Protection grade | IP65 | IP65,IP68 | IP65 | IP65,IP66 |
Starting torque | 3×10-2 N.m Max | |||
Working temperature | -25°...85℃(Customizable operating temperature -40°.... 100 ℃) | |||
Storage temperature | -35C...100℃ | |||
Impact-resistant | 1000m/s²,6ms | |||
Anti-vibration | 100m/s²,10.…200Hz | |||
Pulse number | Common pulses:10,15,50,100,120,125,200,250,256,300,360,400,500,512,600,1000,1024,1200,1250, | |||
Wiring meter | |||||||||
Colour | white | black | red | green | yellow | pink | blue | orange | Shielding |
Signal | Vcc | 0V | A | B | Z | - | - | - | _1) |
Signal | Vcc | 0V | A | B | Z | A/ | B/ | Z/ | _1) |
Order model code: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||
Incremental encoder | SAH50S | － | XXX | XX | X | X | X | -X X X X X | -XX | ||
1. Specification series | |||||||||||
SAH50A | － | ||||||||||
SAH50B | － | ||||||||||
SAH50C | － | ||||||||||
2. Shaft dimensions | |||||||||||
006 Shaft type/Shaft sleeve Ø6mm | 006 | ||||||||||
008 Shaft type/Shaft sleeve Ø8mm | 008 | ||||||||||
010 Through-hole typeØ10mm | 010 | ||||||||||
012 Through-hole typeØ12mm | 012 | ||||||||||
3. Connection form | |||||||||||
A1 cable Ø7mm, 8x2x0.14mm ², 1m | A1 | ||||||||||
8-pin AC plug | AC | ||||||||||
AB plug 12-pin M23 | AB | ||||||||||
4. Qualification method | |||||||||||
The A-axis protrudes backward | A | ||||||||||
R exits radially and laterally | R | ||||||||||
5. Signal output | |||||||||||
6 A+ B+ Z+ and A- B- Z- | 6 | ||||||||||
3 A B Z | 3 | ||||||||||
6. Output circuit | |||||||||||
T 10-30V, HTL push-pull output | T | ||||||||||
E 5V, TTL driver output | E | ||||||||||
F 5-30V, HTL push-pull output (Similar products to replace those used by customers in various oil fields) | F | ||||||||||
7. Pulse count: | |||||||||||
100,120,125,200,250,256,300,360,400,500,512,600,1000,1024,1200,1250,1500,1800,2000,2048,2500,3000,3600,4000,4096,5000(5000Customization is available within the pulse range) | 01024 | ||||||||||
8. Special specifications | |||||||||||
Order model code: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||
Incremental encoder | SAH58T | － | XXX | XX | X | X | X | -X X X X X | -XX | ||
1. Specification series | |||||||||||
SAH58N | － | ||||||||||
SAH58D | － | ||||||||||
SAH58F | － | ||||||||||
2. Shaft dimensions | |||||||||||
006 Shaft sleeve Ø6mm | 004 | ||||||||||
008 Shaft sleeve Ø8mm | 008 | ||||||||||
010 Shaft sleeve Ø10mm | 010 | ||||||||||
012 Shaft sleeve Ø12mm | 012 | ||||||||||
014 Shaft sleeve Ø14mm | 014 | ||||||||||
015 Shaft sleeve Ø15mm | 015 | ||||||||||
3. Connection form | |||||||||||
A1 cable Ø7mm, 8x2x0.14mm ², 1m | A1 | ||||||||||
8-pin AC plug | AC | ||||||||||
AB plug 12-pin M23 | AB | ||||||||||
4. Qualification method | |||||||||||
The A-axis protrudes backward | A | ||||||||||
R exits radially and laterally | R | ||||||||||
5. Signal output | |||||||||||
6 A+ B+ Z+ and A- B- Z- | 6 | ||||||||||
3 A B Z | 3 | ||||||||||
6. Output circuit | |||||||||||
T 10-30V, HTL push-pull output | T | ||||||||||
E 5V, TTL driver output | E | ||||||||||
F 5-30V, HTL push-pull output (Similar products to replace those used by customers in various oil fields) | F | ||||||||||
7. Pulse count: | |||||||||||
10,15,50,100,120,125,200,250,256,300,360,400,500,512,600,1000,1024,1200,1250,1500,1800,2000,2048,2500,3000,3600,4000,4096,5000,8192,10000,16000(16000Customization is available within the pulse range) | 01024 | ||||||||||
8. EX explosion-proof type | |||||||||||
EX explosion-proof encoder EX II 2G Ex ib IIB T4 Gb | EX | ||||||||||
Order model code: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||
Incremental encoder | SAH58 | － | XXX | XX | X | X | X | -X X X X X | -XX | ||
1. Specification series | |||||||||||
SAH58A | － | ||||||||||
SAH58B | － | ||||||||||
SAH58C | － | ||||||||||
2. Shaft dimensions | |||||||||||
006 Shaft typeØ6mm | 006 | ||||||||||
008 Shaft typeØ8mm | 008 | ||||||||||
010 Shaft typeØ10mm | 010 | ||||||||||
3. Connection form | |||||||||||
A1 cable Ø7mm, 8x2x0.14mm ², 1m | A1 | ||||||||||
8-pin AC plug | AC | ||||||||||
AB plug 12-pin M23 | AB | ||||||||||
4. Qualification method | |||||||||||
The A-axis protrudes backward | A | ||||||||||
R exits radially and laterally | R | ||||||||||
5. Signal output | |||||||||||
6 A+ B+ Z+ and A- B- Z- | 6 | ||||||||||
3 A B Z | 3 | ||||||||||
6. Output circuit | |||||||||||
T 10-30V, HTL push-pull output | T | ||||||||||
E 5V, TTL driver output | E | ||||||||||
F 5-30V, HTL push-pull output (Similar products to replace those used by customers in various oil fields) | F | ||||||||||
7. Pulse count: | |||||||||||
10, 15, 50，100，120，125，200，250，256，300，360，400，500，512，600，1000，1024，1200，1250，1500，1800，2000，2048，2500，3000，3600，4000，4096，50008192，10000，16000(16000Customization is available within the pulse range) | 01024 | ||||||||||
8. EX explosion-proof type | |||||||||||
EX explosion-proof encoder EX II 2G Ex ib IIB T4 Gb | EX | ||||||||||
Dimension installation drawing
Product Display
Compact incremental encoders, with their small size, can be easily adapted to narrow Spaces
The measurement is precise, the response is rapid, and it can stably output pulse signals
Its compact design not only saves installation space but also optimizes the equipment layout
It is applicable to scenarios such as automated production lines and precision instruments, injecting strong impetus into the efficient operation of equipment
Application Cases
Compact incremental encoder are widely used in the automotive industry, lifting industry, printing and packaging industry, textile industry, wind power industry, logistics industry, machine tool industry, etc.
Service
1. Precautions for Using Encoders
A place where the ambient temperature must not exceed the storage temperature; A place where the relative humidity must not exceed the storage
humidity; It cannot be in places with sharp temperature changes and fogging. Places close to corrosive gases and flammable gases; Stay away from
places with a lot of dust, salt and metal powder. Stay away from places where water, oil and medicine are used; Excessive vibration and shock can be
transmitted to the main body
2. Precautions for Installing Encoders
Electrical components must not be subjected to overvoltage or other phenomena. Please conduct static electricity assessment of the setting
environment, etc. Do not allow the motor power line to approach the encoder. The FG wire of the motor and the FG wire of the mechanical device
must be reliably grounded. Since the shielded wire is not connected to the encoder body, the shielded wire must be effectively connected to the
ground at the user end
3. Precautions on Wiring
When used at the specified power supply voltage, please pay attention to the decrease in power supply voltage amplitude caused by the long wiring.
Please do not use the encoder line and other power lines in the same pipe or bundle them in parallel. Please use twisted-pair wires for the signal line
and power line of the encoder. Please do not apply excessive force to the wire harness of the encoder, as there is a risk of wire breakage
4. Regarding the warranty of the encoder
Within twelve months of purchasing the products of our company, if any malfunction occurs due to correct use in accordance with the precautions
in the user manual, warning signs, etc., free warranty will be provided.
The following situations will be charged even within the warranty period: (Freight is at your own expense)
①. Faults and damages caused by the user landing during transportation or handling or improper installation;
②. Faults of this product caused by the machine connected to it;
③. Faults and damages caused by fire, salt water, corrosive gases, abnormal voltages, and other natural disasters such as earthquakes, lightning, wind, and floods;
④. Repair, adjustment or modification without the permission of our company (the label is not present or the outer cover is removed by oneself).
⑤. Malfunctions that occur when the user does not follow the usage methods and precautions described in the user manual.
⑥. Except where there are other agreements signed with the client.
