Product Description
Swift, hardcore and efficient cutting.
The 45W high-power MC01+ ultrasonic cutter features a brand-new, upgraded PZT8 formula.
Functional Features
· Better Thermal Control
· Max Power 45W
· Upgraded PZT8 Material
· 6 Interchangeable Blades
· Enhanced Sensitivity
· Safety Design
· All-New Power System
1. Zero-lag, silky-smooth cutting
The root cause of cutting lag is the delay in frequency tracking.
Say no to the delay of digital frequency tracking.
A proprietary industrial-grade fully-analog frequency-tracking circuit is used.
1.PVC foam board
2.figure
3.Leather
4.cardstock
1.carbon fiber board
2.Thin wooden board
3.ABS plastic
4.PVC water pipe
2. 45W all-new power system, 40,000 high-frequency vibrations per second
High-power cutting
Ultra-lightweight body
Zero-lag frequency tracking
40kHz high-frequency vibration
3. 6 interchangeable blades for a full range of cutting experiences
Model making, DIY crafts, 3D printing and more - niche needs are covered too, with easy and precise cutting.
4. A palm-sized cutting tool for precise, effortless control
“Compact” and “easy to use” taken to the extreme - light and portable, take it along for outdoor crafts or quick home repairs.
120g product weight/26mm product width
Product Display
MAGICUTTER industrial-grade standard
The MC01+ performance hardcore version: from 30W to 45W, where exactly is the core upgrade?
Item | MC01+ | Competitor 1 | Competitor 2 | Competitor 3 | Competitor 4 |
Cross-section | 26×23mm | φ27mm | 33.5×31.5mm | 31×24mm | 36.4×29.7mm |
Length | 182mm | 220mm | 179.5mm | 187.8mm | 235.5mm |
Weight | 120g | 205g | 173g | 120g | Unknown |
1. Auto power-off protection after 10 minutes of inactivity
No more manual operation - technology simplifies the workflow.
Safety is always on, for more peace of mind.
2. Professional cutting and multiple power options to suit you
Power option 1: direct power supply via a 45W GaN power adapter.
Power option 2: supports fast-charge power bank supply for outdoor or off-grid use.
The power bank shown is only to illustrate power-bank compatibility; the actual product does not include a power bank.
Replacing the Blade
Before replacing a blade, make sure the power is switched off and the blade and ultrasonic transducer have cooled down before starting.
1. Loosen the fastening screw by turning in the direction shown in the illustration.
2. Pull out the old blade, being careful not to cut your fingers.
3. Insert the new blade into the slot of the blade fixing block.
Make sure the blade is pushed to the very bottom of the slot, and do not reverse the blade's cutting edge-refer to the illustration for the correct direction.
4. Tighten the fastening screw by turning in the direction shown.
If the fastening screw is not tightened or becomes loose, it may cause abnormal heating during cutting.
Product parameters
Parameter | Specification |
Dimension | 26×23×182mm |
Weight | 120g |
Input Voltage | 9V/12V/15V/20V |
Max Power | 45W |
Operating Environment | 5–35℃, humidity 20–70% (non-condensing) |
