Product Description
Brushless motor drive board
Small size/high power /PWM speed regulation
Source manufacturers, professional after-sales service team
Scheme design Custom made by sample Strength development
The brushless motor driver mainly replaces the mechanical commutation of the traditional brush motor by electronic commutation. It uses sensors to monitor the position of the motor rotor in real time, according to the rotor position information, the circuit inside the driver will apply current to the various windings of the motor in a specific order, thus generating a rotating magnetic field to drive the rotor to continue to rotate. This electronic commutation method not only avoids the problems of brush wear and electric spark caused by mechanical commutation, but also greatly improves the efficiency and reliability of the motor.
Functional Features
Small size
With highly integrated circuit design and miniaturized electronic components, the overall size is small, easy to install and use in equipment with limited space, which can effectively save the internal space of the equipment.
High power output
With large current output capacity, it can drive high-power brushless motors, and the maximum power can reach hundreds of watts or even higher according to the specific model and design, which can meet the needs of some equipment with high power requirements, such as power tools, drones, industrial automation equipment and so on
High efficiency conversion
The internal circuit adopts advanced power conversion technology, which has high conversion efficiency, reduces energy loss, reduces heating, improves energy utilization, and also helps to extend the battery life of the equipment or reduce energy consumption costs.
Multiple protection functions
Usually includes overcurrent protection, overvoltage protection, undervoltage protection, short circuit protection, overheat protection and motor lock-rotor protection, etc., when there is an abnormal situation can automatically take protective measures in time to avoid damage to the drive board and motor, improve the reliability and stability of the system.
Product Display
Application
Uav: The brushless motor drives the UAV to achieve precise control of flight attitude and stable flight, and the small size and high-power output can meet the requirements of the UAV for power and endurance.
Industrial automation equipment: such as the conveyor motor of the automated production line, the joint motor of the robot arm, etc., provides reliable power and flexible speed regulation function to ensure the efficient operation of the equipment.
Intelligent robot: The joint motor and walking motor drive the robot to achieve flexible movement and precise operation of the robot, and the small size is conducive to the miniaturization and lightweight design of the robot.
Uav
Industrial automation equipment
Intelligent robot
Dimensional drawing
Product parameters
| Drive electrical specifications | |
|---|---|
| Drive type | Inductive brushless motor driver |
| Voltage range | DC8V-26V Rated power :≤50W |
| Working current | 3A |
| Current limiting protection | 6A (set by external resistance) |
| Operating temperature | -10℃--70℃ Storage temperature :-30℃--125℃ |
| Storage temperature | To 40 ℃ -- 105 ℃ |
| Locked-rotor protection | The motor will stop running if it is blocked for 2 seconds. |
| Driver size | Length 35mmx width 58mm |
Application wiring diagram
1. Driver wiring instructions
Motor wiring is shown in the following figure:
① Motor working power supply voltage positive (VCC). ② Motor power supply voltage negative (GND).
③ speed feedback signal, pulse function output (FG). ④ Motor direction control input signal (F//R).
⑤PWM modulation signal is used for motor speed regulation (PWM). ⑥ Motor brake signal input control (BRA).
⑦ Motor W phase Hall signal output (H3). ⑧ Motor V phase Hall signal output (H2).
⑨ Motor U-phase Hall signal output (H1). ⑩ Hall input voltage negative (GND).
⑪ Hall input voltage positive 5V(VCC). ⑫Electrical W phase (C).
⑬Motor V phase (B). ⑭ Motor U phase (A).
6PIN terminal J1 (XH2.5) :
Red line, black line, yellow line, white line, blue line, green line.
5PIN terminal J3 (XH2.5) :
Blue line, yellow line, white line, black line, red line.
3PIN terminal J4(XH2.5) :
Blue thread, yellow thread, white thread.
Second, the driver lead function description
The specific functions are as follows:
① The power supply voltage of the motor is positive (VCC), and the voltage range is DC8V-26V.
② Motor working power supply voltage negative (GND).
③ Speed feedback signal, output pulse signal (single FG, for external equipment to detect motor speed, two polar magnetic ring motor to output two square wave pulse after one turn), output voltage range 0-5V(controller internal pull up 5V), speed =FG*60/ motor pole number.
④ Motor direction control input signal (F/R), input voltage range 0-5V(controller internal pull up 5V), in general, high level motor reversal (CCW), low level motor forward (CW), special cases can also be high level motor forward (CW), low level motor reversal (CCW), the specific situation is determined by the actual motor.
⑤PWM modulation signal is used for motor speed regulation (PWM). Speed regulation through PWM mode, less than 0.5V motor running at full speed, higher than 4.5V motor stop.
⑥ Motor brake signal input control (BRA), input voltage range 0-5V(controller internal pull up 5V), high level motor running, low level motor stop. To ensure job stability. Recommended low level ≤0.5V, high level ≥2.7V.
⑦， ⑧，⑨，⑩，⑪ ，⑫ ，⑬ ，⑭ according to the specific motor wiring.
Note :③, ④, ⑤, ⑥ four pins, can not input a voltage higher than 5V, otherwise it will damage the drive.
Three-phase motor ⑫ ，⑬ ，⑭According to different winding methods of different motors, corresponding U, V and W are also different.
Custom Process
Demand communication
Scheme design
Sample making
Mass production
Quality Control
When purchasing raw materials, strictly select suppliers to ensure material standards. For NdFeb permanent magnets and other magnetic materials, detect the residual magnetic, coercive force and other magnetic parameters; For enamelled wire, measure wire diameter tolerance and insulating paint thickness; Electronic components need to pass electrical performance and reliability tests to control quality from the source.
In production, advanced automation equipment and precision technology are used. High precision winding machine is used for stator winding to ensure accurate turns and neat wiring. Permanent magnet installation with professional tooling and equipment, strict control of position deviation. The real-time monitoring system is set on the production line to detect the key parameters such as resistance and back electromotive force online, and the abnormal is stopped and checked and corrected.
In the inspection process of the finished product, the appearance inspection should be carried out first to ensure that there is no defect and the label is clear. Then the performance test was carried out, and the parameters such as speed and torque were measured under different loads, and the performance curves were drawn and compared. At the same time, the high and low temperature cycle test is carried out to detect stability and reliability, and vibration and noise are also measured with professional equipment.
Service
Dedicated service, along the way
Warranty worry-free, extended repair, often return to promote optimization, peace of mind choice, all in control.
Before the purchase of professional consultants rapid response, accurate recommendation products;
Purchase logistics is efficient, specially-assigned to ensure delivery;
After the purchase 7×24 hours customer service answer questions, engineers at any time to save the "machine";
Pack
| specification | Length (cm) | Width (cm) | Height (cm) | Volume (cm3) | Weight (g) |
|---|---|---|---|---|---|
| 5A Brushless drive -8505-50W | 6 | 4 | 1 | 24 | 100 |
After-sale guarantee
After-sales service: We provide comprehensive after-sales technical support, if you encounter any problems in the process of use, the professional after-sales engineer team will respond quickly, through telephone, mail or remote assistance, to provide you with detailed solutions. We also provide regular return visits to our products to understand how they are used and to collect your feedback in order to continuously optimize our products and services. In addition, in strict accordance with the quality assurance policy, we provide free repair or replacement services for products with quality problems during the warranty period, so that you have no worries.
