Eriksen - YA-160 high precision sensor encoder

Changchun Shunwei Technology Co., Ltd.

Brand-Official Supplier 10 years

YA-160 high precision sensor encoder

YA-160 Anti-pollution and anti-shock capability Electromagnetic induction detection principle Inductive gate encoder

Positioning accuracy：±10—20
Resolution：10—23
Repeat Positioning Accuracy：±1
Maximum speed：15000

USD： 1242

ablity：Monthly Output1000

contact shop

Product Description
Product Params

Product Description

YA-160 high precision sensor encoder

Electromagnetic induction principle / absolute value
High precision / split type/IP67
High speed / easy installation
High reliability / super strong environmental adaptability

Performance Parameters

Absolute value	√
Resolution	10—23	bit
Repeat Positioning Accuracy	±1	LSB
Positioning accuracy	±10—20	arc seconds
Internal location update cycle	<0.01	ms
Maximum speed	15000	r/min
Communication interface protocol	SSI \ BISS-C \ UART serial port (all three interfaces are based on RS422 hardware standard)
Supply voltage	5-12 or 12-30 available	V
Current consumption	<0.25	A
Reverse power protection	The maximum reverse protection voltage of the power supply is the maximum value of the nominal supply voltage
Operating temperature	-40—80	℃
Protection level	IP67
Data valid time after power on	<1 (Data is valid 1s after the encoder is powered on. Please make sure the encoder does not rotate within 1s)	S
Assault	IEC 60068-2-27 100g for 11ms - axial and radial
Shock	IEC 60068-2-6 20g for 10-2000Hz - axial and radial
EMC electromagnetic compatibility	IEC 61000-6-2 compliant - suitable for harsh EMC environments
EMC electromagnetic radiation	Complies with IEC 61000-6-4 - For use near equipment susceptible to EMI

Size Chart

Stator outer diameter	160
Rotor inner diameter	98.8
Rotor outer diameter	151
Rotor inner diameter, H7 tolerance	98.8₀^+0.035
Rotor positioning hole diameter	2.9
Diameter of the circle where the rotor positioning hole is located	103.8
Stator outer diameter, H7 tolerance	160⁰_-0.04
Stator inner diameter	109.8
Diameter of the circle where the stator positioning hole is located	155